Centurion D3 Guide de l'utilisateur télécharger pdf (Page 10)

Introduction

Anti-crushing device

The electronic controller synchronizes the functions of the gate operator. Although

the controllers for each operator are marginally different, the functions and safety

features which are described below are similar.

Gate closing

Gate opening

Gate closing into an obstruction Gate automatically reverses and re-opens

Gate opening Gate stops on hitting the obstruction

Page 10

If the gate is obstructed repeatedly four times, either opening or closing, often referred

to as multiple collision, the gate will stop and will not respond to trigger inputs for two

minutes.

After this time the gate will once again respond to command signals. This function is a

warning to the user that the obstruction must be removed. (The number of obstruc-

tions before the system will shut down can be adjusted to suit, default is four).

Controller features and functionsController features and functions

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Pas de commentaire

Centurion D3 Guide de l'utilisateur Page 10