Centurion D3 Guide de l'utilisateur télécharger pdf (Page 8)

The gates can be opened or closed in the following way:

A handheld radio transmitter, carried in the motor car, sends a coded signal to the

receiver mounted in the control enclosure to open or close the gate.

Radio transmitter

A10

Page 8

Normal operationNormal operation

Press once for approximately one second to initiate gate motion.

If the transmitter is pressed while the gate is either opening or closing the gate will

immediately stop. Pressing the button again will cause the gate to reverse.

If the automatic closing feature (see Controller Features and Functions) has been

selected and the gate is closing automatically when the transmitter is pressed, the

gate will stop and stay in that position. Pressing the button again will cause the gate to

re-open. If the gate is opening with the automatic closing facility selected, and the

transmitter is then pressed, the gate will stop. The gate will close automatically after

the Autoclose delay time.

Intercom pushbutton

PRESS TO

OPEN GATE

Visitor outside gate requests entrance. Gate opened from intercom

pushbutton inside house.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Pas de commentaire

Centurion D3 Guide de l'utilisateur Page 8